Single repair job
A motor is waiting. Start from the unit in front of you.
- Motor model, SKF designation and bearing position
- A clear photo of the marking if the model details are incomplete
- Destination country, postal code and the date you need it
SKF bearings by application
SKF bearings for electric motors and the machines they drive
Electrical Equipment helps maintenance teams, repair shops and replacement buyers start from where the motor runs, then quote the exact SKF execution it calls for.
- Products listed
- 173
- Bearing categories
- 46
One motor or a full list
Quoted from the SKF designation you already have.
Where the motor runs
Choose your application, then go straight to its bearings
Each application page ties a motor setting to the SKF bearing categories and products that serve it.
Electric Motors & Equipment
Ball Bearings · Deep Groove Ball Bearings · Deep Groove Ball Bearings（因为618xx本质上是深沟球轴承） · Cylindrical Roller Bearings
View products 91 models
Motor Repair & Rewinding
Deep Groove Ball Bearings · Cylindrical Roller Bearings · Sealed and Shielded Bearings · Special Bearings
View products 92 models
Motor Remanufacturing
Ball Bearings · Deep Groove Ball Bearings · Cylindrical Roller Bearings · Roller Bearings
View products 131 models
Electrical Maintenance Contracting
Fan and HVAC Bearings · Bearing Units and Housings · Plummer Block Housings · Y-Bearings Insert Bearings
View products 55 models
Water Treatment Facilities
Pump and Compressor Bearings · Angular Contact Ball Bearings · Spherical Roller Bearings · Deep Groove Ball Bearings
View products 118 models
Industrial Machinery Replacement
Bearings by Industry · Agricultural Machinery Bearings · Automotive Bearings and Parts · Clutch Release Bearings
View products 87 models
Bearing selection points
Four points decide whether a motor bearing quote is right
Bearing position, execution, model suffix and complete assembly define the exact part. Confirm all four in the inquiry and the quote matches the motor.
| Check | Bearing position | Execution | Model suffix | Complete assembly |
|---|---|---|---|---|
| What to confirm | Which shaft position the bearing serves, such as drive end or fan end. | Any specified insulated or hybrid ceramic construction, plus the clearance requirement. | The full SKF designation, with every suffix as written on the parts list. | The complete assembly, and any housings or mounting accessories listed separately. |
| Why it matters | Shaft positions close in size can need different executions. | A specified execution stays specified, not simplified to a standard bearing. | The suffix stays intact when the workshop passes the request to purchasing. | Alternatives are marked separately, and technical changes need your approval. |
| Who checks it | Motor workshop supervisor | Electrical maintenance engineer | Electromechanical procurement buyer | Motor workshop supervisor |
Field and workshop
One motor on the bench or a full maintenance list: both get quoted
Single repair jobs and multi-machine lists move at different speeds, so each one starts with different details.
Multi-equipment maintenance list
Several machines, one list. Build it line by line.
- SKF designation and quantity for each line
- Standard needs and specified executions handled separately
- Delivery destination and needed-by date for the whole list
Marking hard to read?
Send a clear photo and note what still needs confirming.
VFD motors and insulation
Specify insulated execution by its SKF designation
When a VFD-driven motor's parts list calls for electrical insulation, the SKF designation carries that requirement. Quote the code, and the insulated execution stays on the quote.
- Insulated variants are supplied to the required SKF designation.
- Hybrid ceramic bearings are quoted where the application specifies them.
- Any technical change goes to you for approval first.
From the application
What motor maintenance buyers say
Our electric motor repair shop sources SKF bearings for rewind jobs. Every deep groove and cylindrical roller bearing we have received matches the OEM motor spec, including the C3 clearance. Our rebuilt motors pass end-of-line noise and vibration tests without issue.
Hans Mueller
We needed SKF bearings for a large industrial motor that had gone down at our water treatment plant. The supplier confirmed the drive-end and fan-end bearings, shipped same-day, and the motor was back in service within the week. Fast when it matters.
James O'Donnell
What stands out is their knowledge of motor-bearing arrangements. They asked about the bearing fixation on the drive end and the shield configuration on the fan end before confirming the SKF references. That level of detail is what prevents warranty returns.
Pablo Ramírez
Supporting your order
Three checks keep your bearing order accurate
Execution confirmation
The exact execution and complete assembly are confirmed before you accept the quote.
Written quote
Model, quantity, price, currency, availability, lead time and validity, stated line by line.
Transport documents by order
Shipping method, dispatch and required transport documents are confirmed for each order.
FAQ
Motor bearing questions, answered
The SKF designation, bearing position and specified execution answer most replacement questions.
How should electrical insulation requirements be stated?
State them by the required SKF designation. Electrically insulated variants are supplied against that code, so the requirement stays visible on the quote. Add the motor model and bearing position so each shaft position is matched correctly.
What documents help identify a motor bearing replacement?
The motor parts list and a clear photo of the bearing marking help most. Include the motor model, the SKF designation and the bearing position. If the information is incomplete, say what still needs confirming.
Can I request a quote for a single motor repair?
Yes. Inquiries are welcome for a single workshop repair and for larger maintenance lists across several machines. Give the quantity for each item, along with the destination and needed-by date.
Will an alternative bearing be substituted without asking?
No. Technical changes require buyer approval, and any alternative is marked separately. You decide before accepting the quote whether an alternative can be considered.
Request a written quote
Send Your Motor Details
Share your motor model, SKF designation and bearing position to get a written quote from Electrical Equipment. Sales cover buyers worldwide.